Skip Navigation

 

KET Digital Guide

Datacasting Equipment and Software

To access the information available through KET datacasting, you will need a digital television antenna, a datacast receiver that connects to your computer, and the software developed by KET.

Datacast Receivers

Datacast receivers are available in two basic configurations: a stand-alone system, in which a single PC is connected to a receiver, and a multi-user system in which one receiver connects to several computers via your local-area network. LAN systems require the ability to pass multicast packets between the datacast receiver and the client PCs.

KET has tested the specific datacast receivers listed below for compatibility with our system. Other receiver cards may also be able to receive KET’s datacast service; please e-mail us at if you have a question about a specific product. As additional products become available, KET will evaluate them for system compatibility.

Supported Receivers:

BroadBand Technologies Inc.
Air2PC-ATSC (PCI and USB models)
Air2LAN (Ethernet LAN)
P.O. Box 85
Renesselaerville, NY 12147
(518) 827-8502

Novra Technologies Inc.
A75 Broadband Receivers (Ethernet LAN)
1100-350 St. Mary Avenue
Winnipeg, Manitoba
Canada R3C 3Z5
(204) 989-4724

Software

KET’s datacasting service requires a 500 MHz Pentium computer or better with Windows® XP, or Windows® 2000 with Service Pack 4 or later, plus Windows MediaPlayer® version 9 or above. You also will need to download and install datacasting software developed by KET. Click on the link below to download the .zip file. Then double-click on the downloaded file, ketdatacast3.4.zip, and run the setup.exe file.

See our Installation FAQ for details about configuring and using the software.



600 Cooper Drive, Lexington, KY 40502 (859) 258-7000 (800) 432-0951